今回の改造はデビルガンダムです。本体はデビルガンダムですが、経年劣化で可動が不足しているため、脚部はJMA0530-MAY ウォードムポッドの可動改造パーツを使用し、上半身はプロポーションを合わせるため、MSF-007TE ガンダムテルティウムとサイコガンダムの大型手を改造パーツとして採用しました。
這次的改造是惡魔高達, 主體是惡魔高達, 但由於年代的久遠,可動性能都不足,所以我用了JMA0530-MAY WoDom Pod 的腿進行可動性的修改, 而上半身我是選擇MSF-007TE Gundam Tertium 和精神感應高達的大型手作為修改從以配合比例.
This time the modification is the Devil Gundam. The main body is the Devil Gundam, but due to its age, the mobility is insufficient, so I used the legs of the JMA0530-MAY WoDom Pod to modify the mobility, and for the upper body I chose the large hands of the MSF-007TE Gundam Tertium and the Psycho Gundam as modifications to match the proportions.
ウォードムポッドのキャノンを外し、MSF-007TE ガンダムテルティウムの大型ハンドを補助ハンドとして換装し、近接戦闘の手段としても活用できるようにしました。
我把JMA 0530-MAY WoDom Pod的炮拆掉换成MSF-007TE Gundam Tertium 的大型手作為輔助手,還可以作為近戰的攻擊手段.
I removed the cannon of the JMA 0530-MAY WoDom Pod and replaced it with the large hand of the MSF-007TE Gundam Tertium as an auxiliary hand, which can also be used as a means of close combat.
ガンダムテルティウムの、完全に侵食されてMA前の状態になる前のオリジナルモード
Gundam Tertium 的原始模式,還沒有完全侵食變成MA前狀態
Gundam Tertium's original mode, before it is completely eaten away and turned into a pre-MA state
後ろ姿、そして下半身に隠された機構も作りました
背後的樣子,而我也在下半身做了些隱藏機關
The back view, and I also made some hidden mechanisms in the lower body
JMA0530-MAY ウォードムポッドの機構を参考に、最終決戦用にアルスガンダムを組み込んでみました。アルスガンダムのボディアーマーをMAの外部アーマーとジェットに変更しました
基於JMA0530-MAY WoDom Pod的機關,我在里面收藏了一隻Alus Gundam 作為最終決戰用途,以Alus Gundam 的身體裝甲我改成了MA的外掛裝甲和噴射器
Based on the mechanism of JMA0530-MAY WoDom Pod, I hide an Alus Gundam in it for the final battle. I changed the Alus Gundam's body armor into the MA's external armor and jet.
巨大MAから脱走した最終決戦兵器「ブラックホール・アルスガンダム」は、見た目は普通で特別な装備や武装も無いが、その真の実力とは?
從巨大MA脫出來的最終決戰兵器,[黑洞阿爾斯高達],看起來平平無其沒有任可的裝備和武器,但真正的能力到底是什麼呢?
The final battle weapon that escaped from the giant MA, [Black Hole Alus Gundam], looks ordinary and has no special equipment or weapons, but what is its real ability?
足は3mm厚のPSオフセット紙で接着し、足指を1本ずつ切り離し、最後に「ガンプラ オプションパーツセット08(ボールデンアームズ)」のコネクターで接続しました。
腳的部分我是用3mm的ps膠版先黏起來,再把每一隻的腳指慢慢切開,最後用Option Parts Set Gunpla 08 (Ballden Arm Arms)的連接件進行連接
For the feet, I glued them together with 3mm PS offset paper, then cut each toe apart, and finally connected them with the connectors from Option Parts Set Gunpla 08 (Ballden Arm Arms).
ブラックホールの夢- デビルモンスタガンダム サイコブレードカスタム
Black Hole Dream - Devil Monster Gundam PSYCHO-BLADE CUSTOM
黑洞之夢-惡魔怪獸高達 腦波傳導刃狀天線特裝
コメント
コメントをして応援しよう
コメントにはログインが必要です
愛と勇気を掴む!
ASW-G-08H 紅犬 MK-2
MK-1のアイデアをベースに、ルプス・レックスをベースにした…
ASW-G-08H 紅犬 MK-1
紅 紅 紅
00H MK-3
今回は00H-MK3です ここでも00Dを基準として赤でHは…
00H MK-2
初めて自作したガンダム00H-MK1をベースに、今回は00H…